Re: clutch slave clip?

[PDQSHIP@aol.com]

In a message dated 96-10-14 15:43:39 EDT, you write:

<< 
 Can someone explain the position of the slave clip
 (looks like a bent piece of wire) and where it goes?
 I never saw it come out (mechanic did it) so I want to
 make sure it goes back right.  I was thinking of replacing
 the pin with a bolt and nut - is this OK, or should I
 just get the pin from the dealer (I lost the other one!)
 --  >>
Straight piece goes in from the drivers side Towards the passenger side,
curve side goes under the hose connection at the slave (between the
connection and the trans).....  Straight side goes thru the pin......   Don't
use anything else, it could make the fix permanent (as in never comes out....
Don't forget to lithium grease the slave cylinder recess before
installing.....


Scott