Re: differential torque wrenches

[PDQSHIP@aol.com]

In a message dated 96-10-28 23:35:15 EST, you write:

<< ranges and types.  I personally use a 0-125lb "clicker" type for most
tasks,
 but also use a 0-25lb dial type for those lower values.  Important note:
 Clicker type wrenches should be released to the zero setting for storage
 between uses. >>>   Careful there folks....  Might suggest reading the
manual that came with the wrench first, most time zeroing is exactly what you
DON"T want to do...  Clickers should be set to a fixed load, and it is not
usually zero it usually is a percentage of the max dial load....  FI, my
250ft/lb clicker has a "stop" reading at 36ft/lbs for storage....  My 125 has
a "stop" at 20ft/lbs for storage....  

Scott