[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: presseur washing my 4000 csq engine
From: Rusty Rae <rrae@cotl.com>
>My engine looks alittle bit grimy so i was thinking of taking my car to
>the coin wash and spraying the engine, any problems with this or
>anything that I sould watch out for?
Three problems really.
If you get water in the ignition (particularly the dist. cap) you will have
problems starting the car again (BTDT). Bring a few rags so that you can
dry out the ignition - something like WD40 will help also.
Once, I knocked off a vacuum hosepipe while pressure washing the engine -
the engine would start, but couldn't generate any power.
Be careful not to contaminate any fluids, particularly brake fluid.
Paul
paul.heneghan@bbc.co.uk
1984 Audi 80 quattro
1989 Audi 100 Avant