PS Pump

[Phil@isham-research.demon.co.uk (Phil Payne)]

In message <UPMAIL13.199709092250170859@classic.msn.com> "Ian J Haseltine" writes:

> Just to let you know - which idiot refitted the aux rad BEFORE he fitted the
> bolt for the power steering pump?
>
> Yup I did. Well I wasnt going to take it out again, so I moved the radiator
> panel to the right and pushed it down so that the bottom part came down below
> the spoiler then loosened the aux rad and pushed it down as far as it would
> go. It was just possible to get the bolt into place. Mind you, I had to be
> d*mn careful that I didnt damage the rad.

This was why I offered to help.  I _know_ that Martin at BR Motorsport
removes the bracket - I'm just not sure what with.

And - later - AH HA!!

The microfiche says that the pump should be removed by removing the
bracket from the side of the cylinder head - NOT as with the WR by
sliding out the pivot bolt.

--
 Phil Payne
 phil@isham-research.demon.co.uk
 Phone: +44 385302803  Fax: +44 1536723021  CIS: 100012,1660