Re: tranny plug(ged)

[audistuff@juno.com (Paul R Anderson)]

>I'm using the most wonderful (not) Bigass(TM) 
>Allen wrench from Craftsman.  They don't offer 
>a socket-type hex. (or so I was told)  This is 
>the reason I can't apply the proper force in 
>the proper direction.
>
If the main problem is angle of attack and leverage, make certain
you have all of the gnk cleaned out of the plug.  Then take a
hacksaw to your BA allen wrench, cutting off a piece long enough
to get a wrench or socket on and to reach to the bottom of the hole.
Then get after it.

In the past, I've used a spare lug bolt and a pair of vise grips.

Good luck,

Paul