RE: Replacing or enhancing 4K CSQ headlights

["PAT MARTIN" <MARDKINS@classic.msn.com>]

The best thing to do is replace them with the h4 set up.  That will allow you 
to do a higher wattage bulb.  But the best light is the h4/h1 setup.  This 
light is phenomenal.  

Pat Martin
864000csq turbo, 2 1/2 cat back, H&R-Boge, MC and loving it.  Drilled and 
stopping it. Koenig Cobra 16x7 with Yokohama A520's turning it,  K&N and uh... 

84 4000sq  AKA: The beater. 
95 subaru legacy 
Bothell, Wa


Hi All,
My 86 4000 has bloody lousy headlights, the car was in a fender bender
before I got it and so the aiming of the headlights is off. I and my
mechanic have tried to adjust it and it is as good as it is going to
get. I was wondering about how to increase the amount of front light,
especially on low beams. I currently drive by braille at night or use
hight beams which are pretty good. It does tend to irritate other
drivers though :).

The options I have come up with include 
1) replacing the bulbs (I got the best that I could at the local chain
store and it made little difference)

2) replace the whole headlight units (If the problem is aim I don't
know if that will fix it)

3) Add auxilliary driving (fog) lights (I am leaning towards this but
I would appreciate any advice on where to site them and what peoples
experiences have been with different models)

Thanks in advance

Gavin Cole

86 4K CS Quattro (mine)
95 VW Passat GLS VR6 (hers)
92 VW Passat G60 Syncro (left in Canada - boo hoo)



==

------------------------------------------------------------------------------
---------------
Never give a sucker an even break.
                                        W. C. Fields


_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com