Re: Any solutions to ABS Cycling when coming to a stop

["Fred Munro" <munrof@isys.ca>]

Mark;

    Check the fins on the ABS reluctor on your hubs. If they have corroded
to the point where some are shorter than the others, the system may be
losing the signal at slow speeds.

HTH

Fred Munro
'91 200q  261k km
-----Original Message-----
From: Mark Pollan <Mark.Pollan@mci.com>
To: quattro <quattro@coimbra.ans.net>
Date: Sunday, October 25, 1998 10:18 PM
Subject: Any solutions to ABS Cycling when coming to a stop


>Hi All:
>
>I recall several had posted that their ABS was cycling when coming
>to a stop.  ABS would engage at around 3 mph.  Any solutions to this.
>Since I did my brakes this weekend I used all new speed sensor caps
>but to no avail.  Any and all (if any) solutions would be greatly
appreciated.
>
>Mark Pollan, '86 5KCSTQ 268K Miles