Re: urq idle problem solved

[quk@isham-research.demon.co.uk (Phil Payne)]

In message <9811061945.AA40346@fluhr.austin.ibm.com> ejfluhr@austin.ibm.com (Fluhr) writes:

> > The underside of the three-way junction hose?
> > Roger Galvin's went bad last week and caused the same problems.  A
> > sod to find.
>
> If I pinch the 3-way junction hose closed, the engine stops running
> lean.  I checked the hose over and did not find any obvious problems
> with it, although I did not take it out of the car to go over it as
> thoroughly as I might.  How did Roger's hose fail?  Was it split on
> the underside?

Roger's had a 1/4" split in the leg that goes to the cam cover itself.

Another one to check is the hose from the ISV to the manifold - often
gets missed out.

--
 Phil Payne
 Phone: 0385 302803   Fax: 01536 723021
 (The contents of this post will _NOT_ appear in the UK Newsletter.)