Re: urq idle problem solved

["Mike Del Tergo" <mdeltergo@hotmail.com>]

>Deg C          Ohm
> 20           1000
> 40            500
> 60            250
> 90            100
>120             50
>
>Changed any components lately? 

No, stored it for a few months, was working fine.  Now as I described.  
I suspect my temp sensor never worked,  threw in a resistor and saw my 
dash cold temp light (blue) for the first time since I have owned the 
car!  I assume it comes on during cranking as I threw a 15 Ohm resistor 
in the circuit and according to your chart that is off the scale hot.  
Kinda surprised at the value range as my manual says the sender is for  
timing changes when cold versus when very hot like 120, I've really 
never seen above 100 since I've installed the temp guage.  Will continue 
checking grounds
Thanks alot
Mike 


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com