RE: Custom EM for 10V turbo

["Mike Del Tergo" <mdeltergo@hotmail.com>]

>The other thing to keep in mind is that those 2 hunks of cast iron 
don't >comprise the sum total of the $800.  Even with the rip-off EM 
castings>you're going to need to buy the tubes and other ancillary bits 
from Audi ...>I don't know how much these additional parts cost ...

Steve raise the right questions, I would hope some bits could be done 
away with a custom casting, the still needed ancillaries could be priced 
out and packaged as a kit.  I would be interested personally in 
compatibility with WR more than WX engines etc.  we should also run this 
by Mark Nelson on the 20V list as he has access to a foundry a well, and 
it would seem some experiencce custom fabbing cast needs.
Mike

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com