[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Custom EM for 10V turbo

To: Steven.Buchholz@kla-tencor.com (Buchholz, Steven)
Subject: Re: Custom EM for 10V turbo
From: Orin Eman <orin@wolfenet.com>
Date: Fri, 15 Jan 1999 11:33:38 -0800 (PST)
Cc: mdeltergo@hotmail.com, ScottyCBoy@aol.com, JCorbs@gtresort.com, quattro@coimbra.ans.net
In-Reply-To: <933713F1FB7BD111AC2300A0C98F1AD101A076F1@MILXPR06> from "Buchholz, Steven" at Jan 15, 99 10:56:21 am
Sender: owner-quattro@coimbra.ans.net

> The other thing to keep in mind is that those 2 hunks of cast iron don't
> comprise the sum total of the $800.  Even with the rip-off EM castings
> you're going to need to buy the tubes and other ancillary bits from Audi ...
> I don't know how much these additional parts cost ...

Why bother with the OEM extras?  Surely the design should use
non-OEM tubes/SS bellows... Only the Flanges have to match.

Orin.

References:
- RE: Custom EM for 10V turbo
  - From: "Buchholz, Steven" <Steven.Buchholz@kla-tencor.com>

Prev by Date: Re: Facom Tools - Opinions?
Next by Date: RE: Lawyer Bashing
Prev by thread: RE: Custom EM for 10V turbo
Next by thread: RE: Custom EM for 10V turbo
Index(es):
- Date
- Thread