Re: ur-Q Oxygen Sensor Replacement

[Orin Eman <orin@wolfenet.com>]

> > >> Anyone know the actual metric size it's supposed to be?
> > >It's a 22mm
> > 
> > ...which is within .01 inches of 7/8, so you won't notice the difference...

> I don't doubt the spec, Frank, but 7/8ths slipped and wore the flats off.

Those O2 sensor sockets with a slot in the side tend to flex a lot...
at least mine does.  I'm beginning to think they are only suitable
for installation.

Since some O2 sensors practically weld themselves in, for removal,
cutting the wires and a deep socket may be a better idea,
or cutting the top of the sensor off as you suggest if you don't
have a socket deep enough.

Orin.