Re: ur-Q Oxygen Sensor Replacement

["Frank J. Bauer" <frankbauer@thevine.net>]

At 03:08 PM 4/10/99 -0500, Douglas Hurst Quebbeman wrote:
>> >> Anyone know the actual metric size it's supposed to be?
>> >It's a 22mm
>> ...which is within .01 inches of 7/8, so you won't notice the difference...
>I don't doubt the spec, Frank, but 7/8ths slipped and wore the flats off.

i still think you won't notice the diff.
this size was intentionally selected because it is equally compatible with
metric and sae tool sets.
an equally crappy 22mm will slip as easily.
try putting a hose clamp on your socket so it won't spread while you are
turning it.

frank