Re: A Arm bushes/torqueing

[quk@isham-research.demon.co.uk (Phil Payne)]

In message <37D030C2.575FF180@mediaone.net> Huw Powell writes:

> (I just did - my metal ones are too steep for my lowered car, so I
> bought 3 12' 2 by 10's, cut them all in half, then cut 45 degree angles
> at various distances along the 6 6 foot pieces.  7" run for each 1.5"
> rise is what I used.  Buncha nails and something to prevent me driving
> off the sides and ends and I'll be done.)

I have a set of light truck ramps.  The slope on standard 'consumer'
car ramps is too steep for the ur-quattro's air dam.

--
 Phil Payne
 UK Audi quattro Owners Club
 Phone: 0385 302803   Fax: 0870 0883933