re: More on Ur-q door ring decals location

[c a l i b a n <caliban@sharon.net>]

mister ritter pontificated:

I heard from a lister who actually measured his door rings and found
that his were installed much lower on the door than the 1.5 inches
that the template would have them. He measured and re-checked that his 
rings were actually 1/4 of an inch from the door bottoms.
Does anyone else think that this is a normal location? I am thinking
that the boys down at the factory might have done some differently
just for fun, but who knows.

	ah yes, handbuilt cars!  i heard that when they ran out 
	of one kind of part, they used another.  

	in the case of this other lister, gunter and hans just
	had a few too many beers with lunch.


--
 rocky mullin - chaotic good
 http://caliban.sf.ca.us/
 two strokes are faster than four!
 this message was composed using the vi editor.
 '83 ur-q - yamaha rz350 - suzuki ts250 - honda nsr250 - bmw k75s